SHURE MX200 ELEMENT SPECIFICATIONS Frequency Response: 50 to 17,000 Hz Polar Patterns: Click to view patterns Output Impedance: EIA Rated at 150 Ohms (180 Ohms actual) Sensitivity (At 1,000 Hz, open circuit voltage*) Note: *1 Pascal = 94 dB SPL • Cardioid: –35.0 dBV/Pa (17.8 mV) • Supercardioid: –33.5 dBV/Pa (21.1 mV) Maximum SPL (1 kHz at 1% THD, 1 k Ohm load) • Cardioid: 124.2 dB • Supercardioid: 122.7 dB Equivalent Output Noise (A-weighted) • Cardioid: 28.0 dB SPL • Supercardioid: 26.5 dB SPL Signal to Noise Ratio (referenced at 94 dB SPL) • Cardioid: 66.0 dB • Supercardioid: 67.5 dB Dynamic Range at 1 k Ohm Load: 96.2 dB Common Mode Rejection: 45.0 dB minimum Preamplifier Output Clipping Level (1% THD): –6.0 dBV (0.5 V) Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector. Power Requirements: 11 to 52 Vdc phantom, 2.0 mA Operating Temperature Range: –18° C to 57° C (0° F to 135° F) Relative Humidity: 0 to 95%