Phone Number: 1-800-523-8195

DBX DriveRack 220i 2x2 Loudspeaker Management System Digital Processor

DBX DriveRack 220i 2x2 Loudspeaker Management System Digital Processor

DBX DriveRack 220i 2x2 Loudspeaker Management System Digital Processor
Model #: DRIVERACK 220i
Quantity:
  • Suggested Retail - $899.95  
  • ASL Price: $629.95
  • You Save - $270.00
Add to wish list
0 out of 5   Not Yet Rated
Sign in to rate
: *
: *
: *
 

Product Description

Designed from the ground up to provide state-of-the-art signal processing, the DriveRack 220i is the perfect tool for any fixed-install application. With a full complement of processing features and Mic/Line inputs the DriveRack 220i can provide both system and microphone processing. Featuring the new, patent-pending Advanced Feedback Suppression (AFS) algorithm, equalization, dynamics processing, delay, matrix mixing, and bandpass filters, the DriveRack 220i will exceed your expectations.

The DriveRack 220i is piloted from the intuitive DriveWare GUI that offers both Configuration and Control of the processing modules. Modules can be accessed, edited and saved as part of programs. Processing modules can be linked between the channels for true stereo processing. If independent processing is desired, parameters can be copied from one channel to the next to ensure that setup is quick and easy. Stored programs can be loaded from either the front panel or from wall mounted Zone Controllers. Zone Controllers can also be used for output muting or adjusting output volumes.

Specifications

  MODEL #   DRIVERACK 220i
  Processor SPECS    
  Analog Inputs    
  Number of Inputs:   (2) Switchable line or mic inputs
  Connectors:   Female XLR line inputs and Euroblock
  Type:   Electronically balanced/RF filtered
  Impedance:   >50k ohm
  Maximum Input Level:   +20dBu
  CMRR:   > 40dB, typically >55db @ 1kHz
  Mic Pre gain:   30 to 60dB
  Mic EIN:   < 110dB, 22Hz-22kHz, 150 ohm
  Mic Phantom Power:   15v
  Analog Outputs    
  Number of Outputs:   2
  Connectors:   Male XLR and Euroblock
  Type:   Electronically balanced, RF filtered
  Impedance:   120ohm balanced, 60ohm unbalanced
  Max Output Level   +20dBu
  A/D Performance    
  Type:   dbx Type IV™ Conversion Systm
  Dynamic Range line:   >113 dB A-weighted, >110 dB unweighted
  Type IV™ dynamic range:   >119 dB, A-weighted, 22kHz BW >117 dB, unweighted, 22kHz BW
  Sample Rate:   48kHz
  D/A Performance    
  Dynamic Range:   112 dB A-weighted, 109dB unweighted
  System Performance    
  Dynamic Range :   >110 dB A-weighted, >107dB unweighted
  THD + Noise:   0.003% typical at +4dBu, 1kHz, 0dB gain
  Frequency Response:   20Hz – 20kHz, +/- 0.5dB
  Interchannel Crosstalk:   >110dB, 120dB typical
  Crosstalk input-output:   >780dB
  Power Requirements Operating voltage:   100 VAC, 50/60Hz, 120 VAC, 60Hz, 230VAC 50/60Hz
  Dimensions:   19” Wide, 1.75”High, 7.7” Deep
  Safety Agency Approvals:   UL 6500, IEC 60065, EN 55013, E 60065

Reviews

Customer feedback

Product rating

0 out of 5   Not Yet Rated
Sign in to rate

Reviews

There have been no reviews for this product.